King CuttingBoard® XL
Is Especially Useful in the Production of Larger One-Piece Boards That Must Weigh Less
Than 50 Pounds to Conform with NFS Regulations.
King CuttingBoard® XL is an exceptionally white natural polyethylene color, creating the bright, clean, sanitary look that commercial food processing operations require.
The sheets are approximately one-third lighter in weight than standard King CuttingBoard®, allowing for easy handling and cleanup. Bacteria, odors and cleaning fluids wash completely off. King CuttingBoard® XL won’t dull knives like wood. It is made to last in the most demanding commercial environments. It is easy to clean, easy to maintain, and will not rot or splinter.
How to Clean
Scrub the material with a strong bristle brush and professional strength detergent to remove any detritus or stains. Rinse with hot water. Sanitize with a ten percent bleach solution. Rinse thoroughly with cold water. King CuttingBoard® XL materials are dishwasher safe. Remove from the dishwasher before the drying cycle for the best result. Allow to air dry.
Standard Sheet Sizes: (in)
60″ x 96″ – 60″ x 120″
Standard Gauge: (in)
1/4″ | 1/2″ | 3/4″ | 1″
Standard Weight: (lbs)
60″ x 96″
40 lbs | 80 lbs | 120 lbs | 158 lbs
60″ x 120″
50 lbs | 100 lbs | 150 lbs | 247 lbs
Standard Gauge: (mm)
6.35mm | 12.7mm | 12.7mm | 19.05mm
Standard Sheet Sizes: (mm)
1219mm x 2438.5mm | 1524mm x 3048mm
Standard Weight: (kg)
1219mm x 2438.5mm
18kg |36kg | 54kg | 72.5kg
1524mm x 3048 mm
22.6kg | 45kg | 68kg | 90.7kg
Custom sizes and thickness are available.
Tolerance information: Gauges ± 5%, both width and length Plus Only at room temperature.
Chemical Resistance | NSF website
| Properties | Units | ASTM | CuttingBoard XL |
| Density | g/cc | D1505 | .77 |
| Tensile Strength @ Yield | psi | D638 | >4,100 |
| Tensile Modulus |
psi | D638 | 165,000 |
| Elongation @ Yield |
% | D638 | 9.6 |
| Flexural Modulus | psi | D790 | 130,000 |
| Flexural Stress @ 5% Strain |
psi | D790 | 2,990 |
| Compressive Properties 10% Stain |
psi | D695 | 2,910 |
| Durameter | Shore D | D2240 | 65 |
| Izod Impact Resistance |
ft lbs/in2 | D256 | 1.4 |
| Heat Deflection Temp. 66p.s.i. |
ºF | D648 | 188º |
| Screw & Nail Withdrawl | lbs | D1760 | 489 & 43 |
*All values are determined on specimens prepared according to ASTM Standards. Nominal values should
not be interpeted as specifications.
King CuttingBoard® XL is made entirely from FDA approved materials.
King CuttingBoard® XL also meets NSF guidelines.
King CuttingBoard XL Physical Properties| King CuttingBoard XL MSDS
White natural polyethylene. Colors can be matched to customer specs. See King CuttingColors® for industry standard, color-coded sheets.
